Written on June 24, 2010 at 10:13 am by Power Tool Team

Tooth Saw Blade

Filed under Power Tools no comments

Tooth Saw Blade
We have found the best prices for you! See below for more!

Triangle Shaft 40mm Dia Hole Saw w Twist Drill Bit Kit
Paypal

US $12.10

New Sabre Saber Jig Saw Blades Cut Wood Metal Drywall Aluminum Universal PVC
Paypal

US $.99

3 in 1 Metal Drilling 60mm Dia Hole Saw Cutter Tool Kit
Paypal

US $15.74

Saws For Wood

A saw is a piece of toughened steel with teeth cut into one edge and a wooden or plastic handle. In some form or other, saws have been one of the principal woodcutting tools for thousands of years. The different types of saw for different jobs can roughly be divided into three main groups:

- saws for cutting along the grain of wood - rip saws
- saws for cutting across the grain of wood - cross-cut saws
- saws for cutting curves or special shapes, such as bow saws and fret saws. There are also special-purpose saws for cutting wood while it is still on the tree - pruning saws, for example.

Saws differ in the size and shape of the blade, and the size, shape and number of teeth they have. Rip teeth, which are designed for cutting down the grain of wood, work like small chisels. The front edge of each tooth is more or less perpendicu¬lar to the saw edge and the back edge slopes at about 30 degrees. If saws with teeth like this are used to cut across wood grain, they tend to tear the fibres and leave a jagged edge. Rip teeth are generally straight-sharpened the tip of each tooth is per¬pendicular to the cutting line. Cross-cut teeth, which are designed for cutting across wood grain, generally slope back rather more and are usually cross-sharpened the teeth are sharpened at an angle to the saw so that the outside edge of each tooth is pointed. Cross-cut teeth tend to cut through the wood fibres rather like a knife. Fleam teeth slope back even more than cross-cut ones and have symmetrical points. They cut equally well on the push and pull strokes.

Saw teeth are usually set teeth are bent slightly outwards from the blade, alternately in each direction, so that the width of the slot cut by the saw is greater than the width of the blade. This prevents the saw jamming in the slot when cutting and lets you change the direction of the cut slightly during sawing. An even set is essential: badly set saws tend to wander.

For years, saw blades have been made from hardened steel which has been tempered to reduce the hardness (and increase the toughness) so that the blade wears well but is still soft enough to be sharpened with a file. More recently, however, saws have been introduced which have 'hardpoint' teeth the tips of the teeth are hardened to reduce wear. Saws with hard-point teeth can have several times the life of a conventional saw, but they cannot be sharpened by conventional methods and they are much more easily damaged when they meet a nail in their path.

There are, confusingly, two systems for describing the num¬ber of teeth a saw has - both are still based on imperial measure¬ments. The first method records the number of complete teeth in an inch length of blade. The second method states the num¬ber of tooth points in an inch, starling on a point and including this in the count. The two methods can be confusing since a saw with eight points per inch actually has seven teeth per inch. The second method is the most widely used and the terminology is often shortened to talk about an eight-point saw, for example. Saws with large teeth generally cut faster but leave a rougher edge than saws with small teeth.

About the Author

You might also want to learn how to cut metal with hacksaw blades and how to choose a good circular saw among many.

the proper hack saw blade to cut intermediate metal conduit is how many teeth per inch?

A fine tooth blade does the best work. If it's standard conduit you can use a tubing cutter to et a smoother end cut.

Friction Saw Blade Sharpening Machine